Setting up a Wireless-N WiFi repeater in the AP mode allows it to create a hotspot for the devices present in your home. But, it looks like you are having a bad day with your WiFi repeater. What happened? Is your Wireless-N WiFi repeater not working in the AP mode? No worries. Walk through this post and learn what to do to get the problem fixed.
Fixed: Repeater Not Working in AP Mode
Check the Repeater Placement
After completing the Wireless-N WiFi repeater setup process, it is advised to place the repeater at an ideal place. Perhaps, the location you’ve chosen to place your Wireless-N WiFi repeater is not meeting the requirements. Don’t know what’s an ideal location for your WiFi repeater. Let us tell you.
The location away from devices emitting radio waves, reflexive surfaces, metal objects, and objects containing a large amount of water can be regarded as an ideal place for the repeater. Therefore, ensure that your WiFi repeater is not placed near such things. If it is, the time for its relocation has come.
Reboot the WiFi Repeater
Sometimes, a simple reboot is enough to bring your Wireless-N WiFi repeater back to its normal working state. It is because rebooting is one of the finest solutions to bid adieu to technical glitches. Therefore, consider giving a fresh start to your Wireless-N WiFi repeater in order to eradicate technical bugs.
The process of rebooting the Wireless-N WiFi repeater is simple. All you need to do is switch off the power supply to your Wireless-N WiFi repeater, wait for some time, and switch on the power supply back. After rebooting the repeater, check whether it has started working or not. If not, then give a read to the next troubleshooting technique.
Check the Repeater-Router Connection
Pay some attention to the connection between your Wireless-N WiFi repeater and the host router. Chances are that it has become weak due to which you are facing the Wireless-N WiFi repeater not working in the AP mode. In that scenario, you need to strengthen the connection between your WiFi devices. The connection can be made strong depending on the source used to connect your WiFi devices.
For a wired source, ensure that the Ethernet cable connecting your Wireless-N WiFi repeater is not worn-out or corroded from anywhere. If it is, get it replaced with a new one as soon as possible. Also, make the connection finger-tight for an effective communication between WiFi devices. If you have used a wireless source, then ensure that the distance between your WiFi devices is not too much. It won’t let them communicate properly.
Check the Power Socket
Well, it might be a pretty obvious reason behind the issue you are facing. But, it has been observed that many users act carelessly when it comes to powering up their Wireless-N WiFi repeaters.
Therefore, do yourself some favor and check the power socket into which you have plugged your Wireless-N WiFi repeater. Is it working fine? No? This is where you lagged. So, what are you waiting for? Find another wall socket in your home near the host router and plug your Wireless-N repeater into it.
Reset the Repeater
If nothing has helped you in bringing your Wireless-N repeater back to work, then chances are that it is improperly set up. Therefore, you need to configure your Wireless-N repeater properly.
But before that, do Wireless-N WiFi repeater reset. As soon as the repeater gets restored to the factory default mode, consider configuring it from scratch.
Sum Up
And, with that, we have reached the end of the troubleshooting guide to fix the Wireless-N WiFi repeater not working in the AP mode. Signing off with the hope that the aforementioned techniques will help you in getting the issue fixed with ease.
