People have been looking for advice and tips on how to machine embroider with metallic thread.
Well, if you have been looking for some simple but helpful tips on machine embroidery with metallic thread, you have come to the right place! Below, we’ll talk about some great ways to use metallic thread to make beautiful embroidery.
Embroider on a sewing machine with metallic thread
Metallic thread products have beautiful embroidery designs, but they can be hard to use in embroidery machines. The problem gets harder to solve because of everything that makes the process harder. Even though there will always be times when the thread breaks and you have to re-thread the machine with metallic thread, the tips below will help you reduce the number of times the thread breaks and make great embroidery designs.
Quality of thread
Always buy the best machine embroidery thread that is high-quality and doesn’t kink easily. Tip: A good thread won’t feel too rough or bumpy when you run your fingers along.
How to Choose the Right Needles
For any embroidery project, it’s essential to use the right needle. We suggest using a 90/40 sharp needle with metallic thread. The big needle size will make it easy to go through the fabric, leaving room for the thread to lay flat on top. Metallic needles have a unique scarf feature that keeps the groove from getting wider and stops stitches from being skipped. This keeps the thread from breaking as much as possible.
Titanium nitride is also often used to coat gold embroidery needles. With this special coating, needles that are used for embroidery designs with a high stitch count last longer. These needles are also slightly rounded so that they can quickly go through fabrics and leave enough room for metallic threads.
When using metallic thread to embroider, needles can wear out quickly. So, always start a project with a brand-new, sharp needle and change it after a few hours of embroidery (preferably four hours).
How to Choose Stabilizers
You shouldn’t use stabilizers with spray adhesives or sticky backs unless you have to. That’s because adhesives can build up in the eye of the needle, causing more friction and causing the needle to break.
Remember that the more stabilization there is, the more friction there is on the needle, and the more likely it is that the thread will break while you are embroidering.
Type of stitch
When stitches are shorter and closer together, the tension is higher, and the thread breaks more often. So, if you use metallic thread, either make a big design or embroider slowly to make sure the stitches on the fabric are smooth.
In the same way, longer stitches can increase the tension on the thread, which can cause the thread to break when embroidering. Again, to keep the thread from breaking, it’s best to use a slower machine speed.
Layers of thread
When there are a lot of thread layers, the density of the fabric goes up a lot, which makes friction and thread breakage more likely. Metallic thread works best in embroidery designs where there aren’t too many layers of thread.
Letter Sizes for Embroidery
If you want to use metallic thread to embroider letters, keep the size of the notes at 1/4″ or larger. Any smaller size will make it more likely that the thread will break.
Spools or cones that are wound evenly:
Any difference from uniformity is terrible for the thread, like when the winding process goes wrong and the tension on the thread isn’t even.
Stop the conversation
We aren’t joking. Put the thread in the freezer for a few hours to make it less likely to break.
Not enough tension
Always use low tension on the thread to keep it from shredding and to make sure it fits.
Takeaway!
Designs made with metallic thread in embroidery sure look beautiful. But users have said that breaking threads while embroidering can be challenging in different ways. Still, this isn’t rocket science, and with a bit of care, you can use metallic thread to make beautiful embroidery designs. So, start using the steps above right away, and we’re sure you’ll be able to create beautiful designs with metallic thread without worrying about it breaking.
